Presetting Stations; Tuning In To A Preset Station - JVC 0803AIMMDWJEM Instructions Manual

Presetting Stations

You can preset 30 FM and 15 AM stations manually.
In some cases, test frequencies have been already stored
for the tuner since the factory examined the tuner preset
function before shipment. This is not a malfunction. You can
preset the stations you want into memory by following the
presetting method.
• There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step 2 again.
On the remote control ONLY:
1
Tune in to the station you want to preset.
• See "Tuning in to a Station" on page 13.
2
Press SET.
"1" starts flashing on the display.
Ex.: When you select an FM station in step 1 .
3
Press ¢ or 4 to select a
preset number.
Ex.: When you select preset number 14.
You can also select the preset
number using the number
buttons.
Ex.: For preset number 5, press 5.
For preset number 15, press
+10, then 5.
For preset number 20, press
+10, then 10.
For preset number 30, press
+10, +10, then 10.
4
Press SET again.
"STORED" appears on the display for a
while.
The tuned station in step 1 is stored in the preset number
selected in step 3 .
• Storing a new station on an already assigned number
erases the previously stored one.
The FM and AM preset stations will be erased in a few days. If this happens,
preset the stations again.

Tuning in to a Preset Station

On the remote control ONLY:
1
Press FM/AM/AUX to select either
"FM" or "AM."
The unit automatically turns on and tunes in
to the previously received station—either
FM or AM.
• Each time you press the button, the band changes as
SET
* For operating the external equipment, see page 27 and the manuals
2
Press the number buttons
to select the preset
number you want.
GROUP SKIP GROUP SKIP
Ex.: For preset number 5, press
1 2 3
4 5 6
7 8 9
10 0 +10
SET
When you unplug the AC power cord or if a power
failure occurs
follows:
FM AM
supplied with it.
5.
For preset number 15, press
+10, then 5.
For preset number 20, press
+10, then 10.
For preset number 30, press
+10, +10, then 10.
FM/AM
/AUX
AUX *
1 2 3
4 5 6
7 8 9
10 0 +10
14