Obihai OBi110 Administration Manual page 93

ITSP SIP Settings Parameter Guide:
Parameter
ProxyServer
ProxyServerPort
ProxyServerTransport
RegistrarServer
RegistrarServerPort
RegistrarServerTransport
UserAgentDomain
UserAgentTransport
OutboundProxy
OutboundProxyPort
RegistrationPeriod
TimerT1
TimerT2
TimerT4
TimerA
TimerB
TimerD
TimerE
TimerF
TimerG
TimerH
TimerI
TimerJ
TimerK
InviteExpires
ReInviteExpires
RegisterExpires
RegistersMinExpires
RegisterRetryInterval
DSCPMark
VLANIDMark
EthernetPriorityMark
X_SpoofCallerID
Description
Host name or IP address of the SIP proxy server
Destination port to connect to the SIP server
Transport protocol to connect to SIP server. The three
choices are UDP, TCP, or TLS
Hostname or IP address of the SIP registrar. If a value is
specified, device sends REGISTER to the given server;
otherwise REGISTER is sent to ProxyServer
Destination port to connect to SIP registrar
Transport protocol to connect to registrar. This parameter
is reserved for future. The only choice is UDP
CPE domain string. If empty, device uses ProxyServer as its
own domain to form its AOR (Address Of Record) or Public
Address when constructing SIP messages (for example, in
the FROM header of outbound SIP Requests).
Note: If SPx Service::URI is specified, additional rules
applied in forming the AOR. See description of URI
parameter for more details and examples
Transport protocol for incoming call control signalling. This
parameter is reserved for future. The only choice is UDP
Host name or IP address of the outbound proxy. Outbound
proxying is disabled if this parameter is blank.
Destination port to be used in connecting to the outbound
proxy
Nominal interval between device register in seconds
Value of SIP timer T1 in ms
Value of SIP timer T2 in ms
Value of SIP timer T4 in ms
Value of SIP timer A in ms
Value of SIP timer B in ms
Value of SIP timer D in ms
Value of SIP timer E in ms
Value of SIP timer F in ms
Value of SIP timer G in ms
Value of SIP timer H in ms
Value of SIP timer I in ms
Value of SIP timer J in ms
Value of SIP timer K in ms
Invite request Expires header value in seconds
Re-invite Expires header value in seconds
Register Expires header value in seconds (not used at the
moment)
Register Min-Expires header value in seconds (not used at
the moment)
Register retry interval in seconds
Diffserv code outgoing SIP packets
VLAN ID for outgoing SIP signalling packets
Ethernet priority code for outgoing SIP signalling packets
Allow outbound Caller ID spoofing. If set to Yes, device will
attempt to set the caller-id name and userid field in the
FROM header to that of a remote caller in the case of a
Copyright 2010-2012 Obihai Technology, Inc.
Default Setting
5060
UDP
5060
UDP
UDP
5060
60
500
4000
5000
500
32000
32000
500
32000
500
32000
5000
32000
5000
60
10
3600
15
30
0
0
3
No
93