Obihai OBi110 Administration Manual page 102

- ext: Required. The extension number assigned to the phone,
such as "104". The account will be installed on Ext 1 of the
phone
- dm: Optional. The dial plan on Ext 1 of the phone, such
as"([1-5]xx|[67][0-9*][0-9*]|9,1 xxx xxx xxxx|9,011
xx.|8,<:1408>[2-9]xxxxxx|8,1 xxx xxx xxxx|8,011 xx.)"
- mohs: Optional. The extension number of the MOH Server,
such as "69*"
- bn: Optional. A function button to be configured with the
attributes that follow. Valid values are "1", "2", ... up to the
maximum number of programmable function buttons on
that phone model. Sidecar buttons are numbered the same
way with 100 added to the button number, such as "101",
'102", ..., "132 (there are 32 buttons per sidecar). A bn
attribute is followed by one or more of the fn, va, and la
attributes. The end of a bn section is marked by another bn
attribute. You must insert a bn="0" attribute after the last
button
- fn: Required. A code that represents the function served by
the current button. This attribute must be located
somewhere between two bn attributes. The following codes
are defined:
o
"Ext 1": A line key for calls on phone's Ext 1 account
o
"Speed Dial": A speed dial. Requires a va attribute
with the target number as the value
o
"BLF": Classic BLF. Requires a va attribute with the
extension number to monitor as the value
o
"Send To Leave VM": Blind transfer the current
active call to leave voicemail. Requires a va
attribute with the target mailbox ID, such as "00",
"01", ..., as the value
o
"Send To Park": Blind transfer the current call to a
parking lot partition. Requires a va attribute with
the parking lot partition mask, such as "0*", "1*",
"**", ... as the value
o
"Monitor VM": Monitor if new voicemail available
in a mailbox. Requires a va attribute with the target
mailbox ID, such as "00", "01", ... as the value
o
"Monitor Park": Monitor a parking lot partition.
Requires a va attribute with the target parking lot
partition mask, such as "0*", "1*", "**", ... as the
value
o
"Monitor Night Mode": Monitor the system's
day/night mode status. No va attribute required.
o
"Auto Night Mode": Monitor if the system's auto
day/night mode switching feature is active. No va
attribute required
o
"Sign On/Off": Let user sign on/off an extension.
Requires a va attribute with the extension number
to sign on/off as the value, such as "101"
- va: Required if the function code requires it. This attribute
must be located somewhere between two bn attributes
- la: Optional. If present, it must be somewhere between two
bn attributes. A string label to display on the phone screen
next to the current function key. For example "$USER",
Copyright 2010-2012 Obihai Technology, Inc. 102