Obihai OBi110 Administration Manual page 22

*03, Request peer device to loopback media in the next outbound call
*04, Request peer device to loopback RTP packets in the next outbound call
*05, Tell device to periodically redial the last called number until the called party rings or answers
*06, Cancel the last repeat dial request
* 07 Redial
* 69 Call Return
* 81 Block Caller ID (Persistent Mode)
* 82 Unblock Caller ID (Persistent Mode)
* 67 Block Caller ID (One Time)
* 68 Unblock Caller ID (One Time)
* 72 Call Forward All (Enter Number + #)
* 73 Disable Call Forward All
* 60 Call Forward on Busy (Enter Number + #)
* 61 Disable Call Forward in Busy
* 62 Call Forward on No Answer (Enter Number + #)
* 63 Disable Call Forward No Answer
* 77 Block Anonymous Calls
* 87 Unblock Anonymous Calls
* 56 Enable Call Waiting
* 57 Disable Call Waiting
* 78 Do Not Disturb – Turn On
* 79 Do Not Disturb – Disable
* 66 Repeat Dial
* 86 Disable Repeat Dial
* 74 Speed Dial Set-Up (Enter SD No. [1-99] then Tel No. + #) ∞
* 75 Speed Dial Read-Back (Enter SD No.)
*76, Clear a Speed Dial
*96, Barge In
*98, Blind Transfer
*4711, Use G711 Only on the next outbound call
*4729, Use G729 Only on the next outbound call
*28, Make OBiBT Bluetooth Adapter discoverable for the next 120s (OBI202 only)
∞ Note: Be careful with the Speed Dial Set-Up as this will conflict with the Speed Dials set-up on the OBiTALK portal. The
Speed Dials that are set-up on the OBiTALK portal will always overwrite anything set-up via the phone connected to the OBi.
Copyright 2010-2012 Obihai Technology, Inc. 22