Obihai OBi110 Administration Manual page 104

SP"x" Calling Features
CallerIDName
MaxSessions
CallForwardUnconditionalEnable
CallForwardUnconditionalNumber
CallForwardOnBusyEnable
CallForwardOnBusyNumber
CallForwardOnNoAnswerEnable
CallForwardOnNoAnswerNumber
CallForwardOnNoAnswerRingCount
AuthUserPassword to compute authorization if challenged by a
401 or 407 response.
Display name to identify the subscriber. The display name field is
usually inserted in a FROM header in outbound SIP requests
(such as INVITE) for the purpose of displaying a Caller ID Name
on the recipient's device.
The maximum number of simultaneous calls that may be
established on this service
Enable call forwarding of all calls unconditionally by the device. If
CallForwardUnconditionalNumber is blank, this parameter is
treated as if it has been set to No.
Note: It is possible for a user to set this parameter from the
phone using a Star Code
Directory number to forward all incoming calls on this service
unconditionally. Maximum Length is 127 characters.
Note: It is possible for a user to set this parameter from the
phone using a Star Code
Enable call forwarding of all incoming calls when the device is
busy. If CallForwardOnBusyNumber is blank, this parameter is
treated as if it has been set to No. Device is considered busy if
one of the following conditions holds:
This service already reaches the limit of simultaneous calls as
specified in MaxSessions
DND (Do Not Disturb) Service is enabled on this service
If the call is routed to the PHONE port where the phone is in a
busy state (such as ringing, dialing, playing reorder, or already
having 2 calls in progress)
Note: It is possible for a user to set this parameter from the
phone using a Star Code
Directory number to forward all incoming calls on this service
when the device is busy. Maximum Length is 127 characters.
Note: It is possible for a user to set this parameter from the
phone using a Star Code
Enable call forwarding of all incoming calls when the call is not
answered after a period as specified in
CallForwardOnNoAnswerRingCount. If
CallForwardOnNoAnswerNumber is blank, this paramete is
treated as if it has been set to No.
Note: It is possible for a user to set this parameter from the
phone using a Star Code
Directory number to forward all incoming calls when the call is
not answered after a period specified in
CallForwardNoAnswerRingCount
Note: It is possible for a user to set this parameter from the
phone using a Star Code
Number of rings to be considered by the device as no answer to
an incoming call.
Copyright 2010-2012 Obihai Technology, Inc.
2
No
No
No
2
104