Obihai OBi110 Administration Manual page 138

CallForwardOnBusyNumber
CallForwardOnNoAnswerEnable
CallForwardOnNoAnswerNumber
CallForwardOnNoAnswerRingCount
AnonymousCallBlockEnable
DoNotDisturbEnable
BridgedOutboundCallMaxDuration
Directory number to forward all incoming calls on
this service when the device is busy. Maximum
Length is 127 characters.
Note: It is possible for a user to set this parameter
from the phone using a Star Code
Enable call forwarding of all incoming calls when
the call is not answered after a period as specified
in CallForwardOnNoAnswerRingCount. If
CallForwardOnNoAnswerNumber is blank, this
parameter is treated as if it has been set to No.
Note: It is possible for a user to set this parameter
from the phone using a Star Code
Directory number to forward all incoming calls
when the call is not answered after a period
specified in CallForwardNoAnswerRingCount
Note: It is possible for a user to set this parameter
from the phone using a Star Code
Number of rings to be considered by the device as
no answer to an incoming call.
Note: 1 ring is approximately 6s
Enable blocking of Anonymous Calls on this
service. If enabled, anonymous incoming calls will
be ignored by the OBi device.
Note: It is possible for a user to set this parameter
from the phone using a Star Code
Enable Do Not Disturb Service. If enabled, all
incoming calls on the PSTN line will be treated with
busy handling by OBi device.
Note: It is possible for a user to set this parameter
from the phone using a Star Code
Limit on the call duration in seconds for all
outbound calls that are bridged from another
trunk. A blank or 0 value implies the call duration is
not limited.
Copyright 2010-2012 Obihai Technology, Inc.
No
2
138