Obiwifi - Obihai OBi110 Administration Manual

Low
DSCP to Priority Class
Mapping
N
(N = 0 – 63)

OBiWiFi

(OBiWiFi is available on the OBi202 and OBi302 only.)
OBiWiFi supports the 8021.11 b/g/n wireless standards so that an OBiWiFi Wireless Adapter may be used with the USB 2.0
port of the OBi202 or Obi302 device. From an IP routing point of view, OBiWiFi is an additional WAN interface. If both WAN
interfaces are connected (Ethernet port and OBiWiFi), the traffic destined to the WAN side will route through the Ethernet
interface only, unless a) the WAN (Ethernet) interface and OBiWiFi are on different subnet and b) the destination address is
on the same subnet as OBiWiFi.
If the OBi is set to function as a LAN switch rather than a router, OBiWiFi is disabled internally.
The guaranteed uplink bandwidth allocation weight for Low
Priority class traffic. It must be a value between 1 and 10
The priority class to be assigned to the packet which has the DSCP
code equal to N in the IP header. The choices are:
Restricted
High
Medium
Low
Note: Restricted class has the highest priority
Copyright 2010-2012 Obihai Technology, Inc.
2
For N = 8, 10, 12, or 14,
the default is Low.
For N = 48 or 56, the
default is High.
For all other DSCP codes,
the default is Medium
73