System Management Features Of The Obi Device; Network Settings - Obihai OBi110 Administration Manual
Voice service bridge and terminal adapter; telephone adapter and voice service bridge; voip phone adapter with router, 2-phone ports, t.38 fax; voip phone adapter with router, 2-phone ports, t.38 fax (sip only)
Hide thumbs
Also See for OBi110:
- Detailed technical specifications (8 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (220 pages)
Table of Contents
Advertisement
System Management Features of the OBi Device
Network Settings
This section applies to OBi100 and OBi110 only. For OBi202, please refer to the section WAN Settings.
Network Settings Parameter Guide:
Parameter
Internet Settings
AddressingType
IPAddress
SubnetMask
DefaultGateway
DNSServer1
Description
The method used for assigning IP address, subnet mask, default gateway, etc.,
to the device. Available choices are:
DHCP: IP address, default gateway, etc. are assigned by DHCP Server. these
these
Static: IP address, default gateway, etc. are taken from the manually
configured values.
The IP address to assign to the device when AddressingType is set to Static.
The subnet mask to use when AddressingType is set to Static.
The default gateway IP address to assign to the device when AddressingType is
set to Static.
IP address of the first DNS server to use, in addition to the ones obtained from
the DHCP server when DHCP is also enabled. If AddressingType is set to Static,
the device only uses DNSServer1 and DNSServer2 for DNS lookup. It will try up
to 5 DNS servers when attempting to resolve a domain name. DNSServer1 and
DNSServer2 will be tried first, whichever is specified, and then the ones
Copyright 2010-2012 Obihai Technology, Inc.
Default
Setting
DHCP
77
Hide quick links:
Advertisement
Table of Contents
