Obihai OBi110 Administration Manual page 81

Interval
FirmwareURL
Username
Password
Auto Provisioning
Method
Interval
ConfigURL
GPRM0 to GPRM7
FirmwareURL
- System Start = Check for f/w upgrade from
FirmwareURL just once on system start
- Periodically = Check for f/w upgrade from
FirmwareURL on system start, and then periodically
at the interval specified in the Interval paramter
Note: First f/w upgrade check on system start will be
performed after a random delay of 0-30s
When Method is set to Periodically, this is the number of
seconds between each checking of f/w upgrade check from
FirmwareURL. If value is 0, device checks once only on
system start (i.e., equivalent to setting Method to System
Start)
URL of firmware package. URL must include scheme.
Supported schemes are http:// and tftp://
Username for authentication, if needed, if scheme is http://
Password for authentication, if needed, if scheme is http://
Current operational method of Provisioning. Available
choices are:
- Disabled = Do not download from ConfigURL
- System Start = Download from ConfigURL just once
on system start
- Periodically = Download from ConfigURL on system
start, and then periodically at the interval specified
in the Interval paramter
Note: First download on system start will be performed after
a random delay of 30 – 90s. If there is a firmware update
scheduled at the beginning. Or a random delay of 10- 70s..
When Method is set to Periodically, this is the number of
seconds between download from ConfigURL. If value is 0,
device downloads once only on system start (i.e., equivalent
to setting Method to System Start)
URL of config file
Non-volatile generic parameters which can be referenced in
other parameters, such as ConfigURL
Copyright 2010-2012 Obihai Technology, Inc.
0
System Start
0
tftp://$DHCPOPT66/$MAC.xml
81