Chapter 8 Cradle Installation
Introduction
A system is comprised of a family of hardware devices interconnected through a WLAN radio backbone to the retail
establishment's server(s). The hardware devices are the MC17 mobile computers, charging cradles (one per
MC17), power supplies, and cables. A dispenser typically refers to a piece of furniture which has mounted to it the
Charging cradles, their power supplies, and cables.
Customers (retail establishments) design their own dispensers to meet their particular floor space and display
requirements. The information in this chapter should help a customer to design a dispenser and to understand the
installation requirements.
Installation of the Charging Cradle
Removing the Front Cover
To remove the front cover:
Loosen two captive screws securing the front cover to the base.
1.
Remove Screws
Figure 8-1
Pull front cover away from base and then lift out of the base.
2.