Motorola MC17 Product Reference Manual page 111

TCM Error Messages (Continued)
Table 9-3
Error
Illegal ESS ID
Disk Full
Target Disk Full
Hex file is READ ONLY
Error opening the file xxx
with write access
Failure creating binary file
Hex File To load is missing
or invalid
Could not locate mobile
computer name in TCM.ini
file
Incorrect disk sizes in
TCM.ini file
INVALID DIRECTORY
One of the disk sizes is
one sector in size
INVALID VOLUME NAME
Corrupt TCM.INI file!
(Invalid value of
VolumeDivisor)
Invalid version of TCM
script file
Corrupt or missing
TCM.ini file
FAILED CONNECTION
TO COM PORT (Could
not get status)
FAILED CONNECTION
TO TERMINAL (Terminal
Not Connected
Properly/Terminal Not
Ready to Receive)
In the Build ESSID Partition window, no ESS ID was entered or the ESS ID entered
was illegal.
TCM failed to create Hex image file at the selected path. Check available disk space.
Build process failed because TCM failed to add file to the image of a disk volume.
Remove some files or increase the disk size.
The Hex image file to be created exists and is read-only. Delete the existing file or
change its attribute.
TCM could not open file xxx with write access. Check if file is in use.
TCM failed to open/create an intermediate binary file.
In Load Terminal window, the file selected to load has invalid status.
While loading the Script Properties window, TCM could not find the TCM.ini section
corresponding to the mobile computer type specified by the current opening script.
Either TCM.ini or the script file is invalid.
The total disk size specified in the script does not match the total disk size defined in
the corresponding TCM.ini section. Check if the script is corrupt or the TCM.ini has
changed after the script was created.
In Script Properties window, the selected System File Path is not a valid directory.
In Script Properties window, one of the disks is too small (one sector in size). This may
cause problem while building images, especially when cushion is enabled. Increase
the disk size.
In Script Properties window, one of the volume labels is not valid.
The VolumeDivisor entry is missing or invalid in the TCM.ini. Reinstall TCM or recover
TCM.ini.
The TCM script was not created by this version of TCM.
TCM could not find TCM.ini file.
While downloading images to mobile computer, TCM failed to connect to the selected
COM port. Check if the COM port is free and is properly configured.
While downloading images, TCM failed to connect to the mobile computer. Check if the
correct flow control protocol is selected and the mobile computer is properly connected
and is in a listening state.
Application Deployment 9 - 15
Description/Solution