Introduction
The SE4400 Integration Guide discusses the theory of operation, installation, and
specifications of the engine, and how to integrate the engine into data capture devices.
Note: This guide provides general instructions for the installation of the
engine into a customer's device. It is recommended that an opto-
mechanical engineer perform an opto-mechanical analysis prior to
integration.
Chapter Descriptions
The manual includes the following chapters.
•
Chapter 1, Getting
operation.
•
Chapter 2,
mounting, housing design, grounding, ESD, and environmental considerations.
•
Chapter 3, SE4400
including decode ranges.
•
Chapter 4, Electrical
•
Chapter 5, Application
•
Appendix A, Register
modes.
About This Guide
Started, provides an overview of the engine and the theory of
Installation, explains how to install the engine, including information on
Specifications, provides technical specifications for the engine,
Interface, includes signal information.
Notes, describes two modes the engine uses.
Settings, provides register settings for the various engine
ix