Sending The Hex Image Using Ipl - Motorola MC17 Product Reference Manual

9 - 10 MC17/MC17T Product Reference Guide
•
The total amount of flash memory space required by the script exceeds the image size. To correct this,
reduce the number of files in the partition or increase the size of the partition. See
on page 9-7

Sending the Hex Image Using IPL

Once the hex file is built, it can be downloaded to the mobile computer using IPL.
NOTE The mobile computer must be inserted in the cradle with appropriate power supply connected to a power
source, for the mobile computer to reset into IPL.
Press and simultaneously hold the Up Arrow and Down Arrow keys for 10 seconds.
1.
Press and hold the Scan key for 10 seconds and release the Up Arrow and Down Arrow keys.
2.
The screen blanks.
3.
The Initial Program Loader menu displays.
4.
Release the Scan key.
5.
Initial Program Loader
Platform
Application
Config Block
Windows CE
Monitor
Splash Screen
Power Micro
Partition Table
Command File
System Reset
Service Battery
Auto Select
Initial Program Loader (IPL) Menu
Figure 9-7
CAUTION
for more information about setting the image size appropriately.
To insure a successful download, do not remove power from the mobile computer while in IPL mode.
Defining Script Properties