Replacing the Bezel
The plastic bezel that covers the display can be replaced if broken or to install a customer specific bezel.
Place the mobile computer on a desktop with the display facing down.
1.
Using a T6 Torx drive, remove two screws securing the bezel to the housing.
2.
Bezel Removal
Figure 1-24
Align the replacement bezel on the housing.
3.
Using a T6 Torx drive, secure the bezel to the housing using the two Torx screws.
4.
Torque the screws to 2.5 ± 0.2 kgf/cm (2.17 ± 0.17 in-lbs.).
5.
Getting Started 1 - 19