Tcm Error Messages - Motorola MC17 Product Reference Manual

9 - 14 MC17/MC17T Product Reference Guide
Load Terminal Window - Serial and Ethernet Tabs
Figure 9-12
Select the Image Files To Load.
14.
In the Comm Port drop-down list, select USB: Symbol Device.
15.
Click Download to begin the operation.
16.
During download, the Downloading screen on mobile computer displays the Device Status and a progress
17.
bar.
When complete, Device Status displays Result was: Success!, or in the case of an error, the cause of the
18.
error.
On completion, press ENTER to return to the IPL menu to select the next partition to download.
19.
To exit IPL, select the System Reset item from the IPL menu (see
20.

TCM Error Messages

TCM validates the cells in the partition table when the Execute button is clicked. Cells highlighted in red contain an
error. Partition loading is disabled until all errors are corrected.
TCM Error Messages
Table 9-3
Error
Failed to build images:
flash file system DLL not
loaded!
Failure finding directory
xxx
Failure creating volume
Failure adding system file
to image
INVALID PATH
Nothing Selected To Build
TCM could not load the DLL required to build images for the targeting flash file system.
Reinstall TCM or recover the DLL.
Building process failed because directory xxx was not found.
Building process failed because a certain disk volume could not be created.
Build process failed because TCM failed to add a certain system file to the disk image.
The path for the image file to build is not valid.
In the Config Build window, no item is selected to build.
Figure 9-7 on page
Description/Solution
9-10).