Chapter 8 Cradle Installation; Introduction; Installation Of The Charging Cradle; Removing The Front Cover - Motorola MC17 Product Reference Manual

CHAPTER 8 CRADLE INSTALLATION

Introduction

A system is comprised of a family of hardware devices interconnected through a WLAN radio backbone to the
retail establishment's server(s). The hardware devices are the MC17 mobile computers, charging cradles (one
per MC17 mobile computer), power supplies, and cables. A dispenser typically refers to a piece of furniture
which has mounted to it the Charging cradles, their power supplies, and cables.
Customers (retail establishments) design their own dispensers to meet their particular floor space and display
requirements. The information in this chapter should help a customer to design a dispenser and to understand
the installation requirements.

Installation of the Charging Cradle

Removing the Front Cover

To remove the front cover:
Loosen two captive screws securing the front cover to the base.
1.
Remove Screws
Figure 8-1
Pull front cover away from base and then lift out of the base.
2.