Misc (3) Tab Descriptions
Table B-6
Field
Use DHCP
This check box control specifies whether the AirBEAM Smart Client uses the DHCP response
server
option 66 to specify the IP address of the FTP/TFTP server.
If enabled, special RF network registry settings are required to force the DHCP server to return
the "TFTP server name" field (option 66). The special RF network registry settings are included,
but commented out, in the radio network registry initialization files (essid_xxxx_yy.reg).
Use DHCP
This check box control specifies whether the AirBEAM Smart Client uses the DHCP response
bootfile
option 67 to specify the Package and Package 1 parameters.
If enabled, special RF network registry settings are required to force the DHCP server to return
the "Bootfile name" field (option 67). The special RF network registry settings are included, but
commented out, in the radio network registry initialization files (essid_xxxx_yy.reg).
Misc(4) Tab
Use this tab to configure various miscellaneous features.
Misc (4) Tab
Figure B-8
AirBEAM Smart Client
Description
B - 7