Replacing A Battery - Motorola MC9190-NI User Manual

User Guide
Figure 4 Installing the Battery
Before using the MC9190-NI, install a lithium-ion battery by sliding the battery into the MC9190-NI.
NOTE Ensure the battery is fully inserted. Two audible clicks can be heard as the battery is fully inserted.
A partially inserted battery may result in unintentional data loss.
When a battery is fully inserted in a MC9190-NI for the first time, upon first power up, the device boots and
powers on automatically.

Replacing a Battery

CAUTION The battery may only be charged and changed outside the hazardous area.
Use only original Zebra batteries, p/n 21-65587-03-NI with 7.4 V 2200 mAh for safe operation.
The use of imitation batteries or batteries from other manufacturers will render the type of
ignition protection ineffective and there will then be a risk of fire or explosion.
Suspend the MC9190-NI prior to removing the battery. Failure to properly remove the
ATTENTION
battery may cause the MC9190-NI to cold boot and potential loss of data.
To replace the battery:
Prior to removing the battery, press the red Power button. On Windows Mobile 6.5 devices, the PowerKey
1.
Action window appears. Tap Safe Battery Swap.
The Indicator LED Bar lights red.
2.
25