Simrad AP50 Installation Manual page 45

Simrad AP50 Autopilot
Note !
Figure 2-33 Alternative Connection to JD5X Distribution Unit Robnet
36
The compass faceplate on the rate compass is the TOP. NEVER
mount it upside down! Level the sensor as close to horizontal as
possible.
RATE
COMPASS
Figure 2-32 RC25 Connection to AP50 Control Unit
• Connect the Robnet connector to the AP50 Control Unit (or
GI51 or NI300X if installed).
• Alternatively, if there is no free receptacle, cut the connector
from the cable and connect the wires in parallel with the
wires going from the distribution unit to the control unit. Do
not connect the yellow and the green wires and ensure that
they do not connect with the terminal or chassis.
RATE
COMPASS
GREY
PINK
BROWN
WHITE
RC25
RATE
COMPASS
Terminal
AP50
CONTROL
UNIT
JD5X
DISTRIBUTION
UNIT
JD5X DISTRIBUTION UNIT
MAIN PCB
TB15
Gry
Bn Wht Pnk
Robnet
20222410 / B