Other Tests
Developed Image Test
Use the Developed Image Test to isolate print quality problems. You
might have to practice this procedure several times to get the timing
correct.
To run the Developed Image Test:
1. Open the front exit tray.
2. Print the test page.
3. As soon as the leading edge of the paper is visible coming out
the front exit slot, turn off the printer.
4. Remove the print cartridge and look at the image on the
photoconductor.
LAN Information
The printer may be connected to one of the following LAN types:
Token-Ring
Ethernet 10BaseT
Ethernet 10Base2
LocalTalk**
The Network external connectors are pictured below. The printer
test page also indicates to which type of LAN the printer is
connected.
52
Service Manual