Fuser Solenoid Removal - IBM 3112 Service Manual

TO COOL FOR 5 MINUTES.
Note: The fuser lamp is a glass heater. Do not touch the lamp with
your hands; skin oils and acids can reduce the life of the heater
lamp. Use a soft cloth to handle the heater lamp at all times if the
lamp is to be reinserted.
1. Remove the fuser.
2. Remove the right lamp bracket [A].
3. Carefully pull the lamp [B] out to the right, using a soft cloth if the
lamp is to be reinserted.
Install the new lamp with the color-coded end away from the
gear.

Fuser Solenoid Removal

1. Remove the fuser.
2. Remove the two mounting screws [A] holding the solenoid
housing to the fuser housing.
Repair Information
71