Service Manual - IBM 3112 Service Manual

Error Code
38 Memory Full
39 Complex Page
43 Font Card Not Supported
44 Defective Font Card
47 Font Card Removed While
Printing
51 Defective Flash
52 Flash Full
53 Unformatted Flash
54 Serial Error
57 Check Duplex Connection
58 Duplex Not Attached
59 Duplex Cover Open
62 Disk Full
63 Unformatted Disk
6

Service Manual

Explanation
Memory used to store pages is full. To
verify that the printer recognizes all the
installed memory, go to the user menus
and print the "Print Menus" test page.
Make sure the memory shown on the
printout matches the installed memory.
Page too complex to print.To verify that
the printer recognizes all the installed
memory, go to the user menus and print
the "Print Menus" test page. Make sure
the memory shown on the printout
matches the installed memory.
Font card format not supported by printer.
Defective font card installed in font slot.
Printer needs data on removed card.
The printer detects a defective Flash
SIMM. If the error recurs replace the
Flash SIMM.
Not enough flash memory for data
requested to be stored.
Flash problem at POR or while
attempting to write.
Framing or parity error on serial.
The duplex unit has been electrically
disconnected from the printer but the
printer top cover is not open. Check the
auto-connect plugs on the duplex unit
and the printer.
Duplex is no longer connected, and
printer top cover is closed.
Top cover of duplex unit is sensed open.
Not enough disk space for data that has
been requested to be written to disk.
Format the disk.