Table of Contents
Advertisement
Printhead Skew
1. 3112-001 and 3116-001: Remove the plug in the top cover.
3112-002 and 3112-003: Open the paper exit stop. Unlatch and
remove the spring-loaded exit stacker.
2. Loosen the screws [A].
3. Run Print Test 1 or the Quick Test on the Diagnostics Menu.
4. Move the pointer [B] to eliminate the skew. Moving the pointer
toward the left raises the left adjustment point on the printout.
Each mark is equivalent to one dot of the skew adjustment
points.
5. Tighten the screws, and verify the adjustment.
Repair Information
61
Advertisement
Table of Contents
