Table of Contents
Advertisement
Fuser Input Guide Removal
1. Remove the fuser input guide [B] by lifting the rear end of the
guide and unsnapping both sides from the fuser.
2. Lift the fuser input guide upward at both sides near the fuser and
slide the guide toward the rear of the machine to release.
3. Lift the guide out of the machine.
4. Clean the fuser input guide before installing it.
Fuser Lamp Removal
CAUTION: THE TEMPERATURE OF THE HOT ROLLER IS 150-230 ˚
C (302-446 ˚ F). USE EXTREME CAUTION WHEN REMOVING THIS
UNIT. BEFORE YOU SERVICE THIS UNIT, ALLOW THE MACHINE
70
Service Manual
Advertisement
Table of Contents
