About This Manual - Microscan EZ Match Imager User Manual

About the EZ Match Imager
About the EZ Match Imager
The key features of the EZ Match Imager are:
• 3 megapixel sensor (color version)
• 1.3 megapixel sensor (monochrome version)
• High-output white LED illumination
• High-speed image processing
• Ability to identify a large database of tube and cap types, and to learn new tube and cap types
• Support for both linear and 2D symbologies
• USB, RS-232, and RS-422/485 connectivity
• A multi-function EZ Button for location, calibration, and read cycle triggering
• A blue target pattern that identifies the center of the field of view
• A green flash (visible from all angles) to signal a tube/cap detection or successful decode
• Easy customization for a variety of specific applications

About This Manual

This manual provides complete information on setting up, installing, and configuring the
imager. The chapters are presented in the order in which an imager might be set up and
made ready for operation.
Highlighting
Serial commands, highlighted command fields, and default command settings are highlighted
in rust bold. Cross-references and web links are highlighted in
ESP, its toolbar headings (Communications, Read Cycle, Symbologies, etc.), menu
topics, and other points of emphasis, are highlighted in Bold Initial Caps.
Host Communications
There are three ways to configure and test the EZ Match Imager :
• Microscan's Windows-based ESP (Easy Setup Program), which offers point-and-click ease
of use and visual responses to user adjustments.
• Serial commands, such as <K100,1>, that can be sent from ESP's Terminal window or
another terminal program.
• EZ Button.
viii
blue bold. References to
EZ Match User's Manual