Microscan EZ Match Imager User Manual page 315

DataBar-14 (Add 8192)
If enabled, DataBar-14 will be active for this database index.
Important: If the stacked and non-stacked operation is required, the DataBar-14 command
must be configured as follows: <K482,2>. If the DataBar-14 status parameter in the
<K482> command is set to either DISABLED or ENABLED, the imager will only read
non-stacked DataBar-14 symbols.
DataBar Limited (Add 16384)
If enabled, DataBar Limited will be active for this database index.
DataBar Extended (Add 32768)
If enabled, DataBar Extended will be active for this database index.
Important: If the stacked and non-stacked operation is required, the DataBar Extended
command must be configured as follows: <K484,2>. If the DataBar Extended status
parameter in the <K484>
will only read non-stacked DataBar Extended symbols.
Color Filter (EZ Match Color Only)
Serial Cmd: <K255,index,shutter speed,gain,focal distance,sub-sampling,row pointer,
column pointer,row depth,column width,threshold mode,fixed threshold value,
processing mode,narrow margins,background color,symbology
filter,color>
Default: General Purpose
Options: 0 = Raw (no filter)
1 = General Purpose
2 = Horizontal 1D Symbols
Color (EZ Match Color Only)
Serial Cmd: <K255,index,shutter speed,gain,focal distance,sub-sampling,row pointer,
column pointer,row depth,column width,threshold mode,fixed threshold
value, processing mode,narrow margins,background color,symbology
type,color filter,color>
Default: Disabled (Database 1)
Options: 0 = Disabled
1 = Enabled
EZ Match User's Manual
command is set to either DISABLED or ENABLED, the imager
Enabled (Databases 2-10)
IP Database
type,color
12-9