Table of Contents
Advertisement
Data Matrix
Data Matrix
Usage:
Very useful where information needs to be packed into a small area, and/or
where symbols need to be applied directly to the substrate with laser etch-
ing, chemical etching, dot peen, or other methods.
Definition:
Data Matrix is a type of Matrix symbology. It is divided into error correction
(ECC) subsets ECC 000 - ECC 200.
Data Matrix ECC 200 symbols (the most commonly used) have an even
number of rows and an even number of columns. Most of the symbols are
square with sizes from 10x10 to 144x144. Some symbols, however, are
rectangular, with sizes from 8x18 to 16x48. All ECC 200 symbols can be
recognized by the upper right corner module being light (binary 0) instead
of dark.
ECC 200
Definition:
When enabled, will decode ECC 200 Data Matrix symbols.
Serial Cmd:
<K479,ECC 200
ECC 100 status,ECC 140 status,ECC 120 status,ECC 130 status>
Default:
Enabled
Note: This is the only symbol type enabled by default.
Options:
0 = Disabled
ECC 000
Definition:
When enabled, will decode ECC 000 symbols.
Serial Cmd:
<K479,ECC 200
ECC 100 status,ECC 140 status,ECC 120 status,ECC 130 status>
Default:
Disabled
Options:
0 = Disabled
ECC 050
Definition:
When enabled, will decode ECC 050 symbols.
Serial Cmd:
<K479,ECC 200 status,ECC 000
ECC 100 status,ECC 140 status,ECC 120 status,ECC 130 status>
Default:
Disabled
Options:
0 = Disabled
7-4
status,ECC 000 status,ECC 050 status,ECC 080 status,
1 = Enabled
status,ECC 000
status,ECC 050 status,ECC 080 status,
1 = Enabled
status,ECC 050
1 = Enabled
status,ECC 080 status,
EZ Match User's Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the EZ Match Imager and is the answer not in the manual?