Timers; Arm Options; Your Servicing Company Details; Fault Tones - Pyronix MATRIX 6 User Manual

Matrix 6/816 User Manual

2.2 Timers

2.3 Arm Options

2.4 Your Servicing Company Details

Company Name

2.5 Fault tones

While system faults are being displayed the keypad sounder periodically emits a low tone. This is to alert you
to the fault. Once you are aware of the fault you can silence the low tones by pressing the ` key once while
the fault is being displayed. If the fault is not cleared for a period of time then the sounder will re-start.
In hidden display mode the fault sounder cannot be silenced.

2.6 Open zones

This is only applicable if the keypad is not in hidden display mode.
To view open zones at any point whilst in disarmed mode use the [ or ] keys.
If enabled by the engineer, all activated zones can also be viewed while the panel is armed and disarmed, if
the zone is currently open the number will flash on the Icon or LCD keypad.
Page 6
Entry Time
Exit Time
Final Exit Delay
Bell Time
Arm Option For Mode A
Arm Option For Mode B
Arm Option For Mode C
Arm Option For Mode D
Programmed
Programmed
Contact Person
Default
20 sec
20 sec
7 sec
4 min
Default
Timed Exit
Timed Exit
Timed Exit
Timed Exit
Telephone
RINS545-7