Disarming The Panel - Pyronix MATRIX 6 User Manual

3.2.3 Quick Arming
It is possible to arm the panel in any of the four arm modes simply by pressing a key (if enabled by the
engineer). Follow the procedure below.
Hold down the arm mode key
a, b, c or d for two
seconds
After the exit timer expires, the
panel will be armed

3.3 Disarming the Panel

3.3.1 Keypad Inside the Premises
Open the Entry/Exit door to enter
the premises
Before the exit timer expires,
enter your user code
ffff
NOTE: If you do not enter your user code before the end of entry time, the panel will go into
alarm.
3.3.2 Keypad Outside the Premises
Enter your user code
ffff
NOTE: In order to protect the premises from unauthorized attempts to match a user code, the
sixteenth wrong key press will generate an alarm.
RINS545-7
This starts the arming procedure.
Example shows Arm Mode B
This starts the entry timer.
This will disarm the system.
This will disarm the system.
Matrix 6/816 User Manual
Page 9