Your Panel Details; Zone Configuration - Pyronix MATRIX 6 User Manual

With remote keypads, software version 1.34

Hide thumbs Also See for MATRIX 6:

Table of Contents

2. YOUR PANEL DETAILS

The Matrix control panel is supplied with the factory default configuration. However, the panel configuration is

flexible and can be changed to meet your requirements.

Ask your engineer to fill in the following tables, noting any changes he might have made to the default

settings.

Zone

Guarded area

NOTE: Zones 7-16 are only available on the Matrix 816.

RINS545-7

Programmed Zone Type

Arm Mode A Arm Mode B Arm Mode C Arm Mode D

Matrix 6/816 User Manual

Default

Zone Type

Entry/Exit

Access

Immediate

Page 5

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the MATRIX 6 and is the answer not in the manual?

Matrix 816 Matrix 6/816