Common Keypad Indications - Pyronix MATRIX 6 User Manual

1.3 Common Keypad Indications

Disarmed Mode
The premises are not armed. All
zones are closed (detectors are
not activated). System is ready to
be armed.
Armed in Arm Mode A
For example, fully armed mode,
when all the premises is armed.
Armed in Arm Mode C
For example, partly armed, when
only part of the premises is armed
Armed + Alarm
The number of the zone in alarm
is displayed. For example, Zone 2
is in alarm.
User Mode
This mode gives access to user
operations.
RINS545-7
Matrix 6/816 User Manual
Disarmed Mode
The premises are not armed.
There are open
example, Zone 6. The system is
not ready to be armed
Armed in Arm Mode B
For example, partly armed, when
only part of the premises is armed
Armed in Arm Mode D
For example, partly armed, when
only part of the premises is armed
First To Alarm Mode
The cause of the first alarm event
will be displayed after entering
the user code. For example, Zone
2 in alarm.
Engineer Mode
This mode is
configuration programming and
should only be used by a qualified
engineer.
zones. For
for system
Page 3