CONNECTING THE COAXIAL CABLE TO THE LNB
Connect the cable and the LNB so as to achieve a configuration
like that in the illustrations below. Remember that it may
require some patience to work all the cable through the feed
arm.
CAUTION
• Coaxial cable can corrode if exposed to moisture.
• Use weatherproof connectors.
1. Work the cable through the feed arm (see Figure 39.)
2. Connect the cable to the LNB connection (see Figure 40).
3. Tighten the cable connection with a 7/16-inch wrench.
4. Apply silicone gel to the cable connection.
5. Secure with cable ties.
6. Add up all the cable lengths for the Receive cable and con-
sult the cable specifications on page 9 to determine whether
you need to install a line amplifier.
30
Coaxial cable
connector
Coaxial cable
G-22006 F
1/18/01
Figure 39
Figure 40