Hughes DW 3000 One-Way Installation Manual page 8

Type of installation
ALL INSTALLATIONS • Coaxial cable (see "Cable specifications" on
• Weatherproof 360° cable connectors
• Cable ties
• Insulated U-shaped tacks
• F-type ground block and screws
• 1/4-inch washer (for grounding if not using RG-6
• #6 washer (to help with drilling)
• Silicone sealant
• 8AWG aluminum and/or 14AWG copper ground
• If not using RG-6 quad shield coaxial cable, one
Wood post All parts supplied
Wood frame roof • If you decide to use 5/16-inch x 4-inch lag screws
Concrete masonry or • 3/8-inch x 3-inch Hilti sleeve anchor, Qty: 6
concrete wall
• If also installing optional brace kit, 1/4-inch x 2-1/4-
Metal pole • Metal pole, 2-3/8-inch diameter, 9 feet long,
• 1-inch x 2-3/8-inch ground clamp for metal pole
• 40-lb. bags quick-setting concrete, Qty: 3
• If not using RG-6 quad-shielded cable, one 5/8-
4
Parts you must supply
page 9)
quad shielded cable)
wire, as required for installation or grounding
scheme
split bolt with nut for connections at the ground
block
for this installation, you must provide them and the
5/16-inch galvanized washers
inch Hilti sleeve anchor, Qty: 4
schedule 40 galvanized
inch by 10-foot ground rod and ground rod clamp
Tools you must supply
• Compass
• Angle finder or protractor
• Carpenter's level
• Pencil or chalk
• Ladder or stepladder
• Electric drill
• Ruler and tape measure
• Adjustable wrench (socket preferred)
• Torque wrench (up to 18 ft.-lbs.)
• Open-end or socket wrenches: 3/16, 1/2, 5/16,
7/16, 9/16-inch
• Needle-nose pliers
• Lineman pliers
• String
• #2 Phillips or similar screwdriver
• Flat-blade screwdriver
• Hammer
• Permanent marker
• Drill bits: 3/8, 1/4, and 1/8-inch
• Drill bits: 3/8, 1/4, 1/8, and 5/32-inch
• Hammer drill
• Masonry drill bits: 3/8-inch
• Hole-digging tools
• Wheelbarrow or concrete mixing box
• Hacksaw