Table of Contents
Advertisement
POINTING THE SATELLITE DISH
1.
Check to see if the elevation reference and polarization set-
tings are still at their correct values. If not, return to page 23
and follow the instructions to align them at their correct val-
ues.
40
2. If you have not already done so, tighten the three mast
clamp nuts all the way; then loosen them just enough to
move the satellite dish side to side and adjust the azimuth.
The clamp bolts should be as snug as possible, such that the
satellite dish can still be moved from side to side.
Bracket Bolt Nut
Elevation Bolt Head
Elevation Bolt
Clamp Bolts (3)
Elevation Pivot
Polarization Scale
TOP label
Polarization Nuts (4)
Elevation Nuts (one on each side)
Figure 51
Advertisement
Table of Contents
