Removing The Cutting Unit - Husqvarna Rider 15V2 AWD Operator's Manual

6. Move the support wheels to their parking
position.
7. Fit the front cover.
8. Secure the collet spring.

Removing the cutting unit

WARNING!
Wear protective glasses when
removing the cutting unit. The
collet spring which tensions up
the belt can go off and cause
personal injury.
1. Carry out points 1-9 to put the cutting unit in the
service position, see "Service position for the
cutting unit".
2. Remove the bolt (3) and lift off the cutting unit.
MAINTENANCE
1
2
3
37
English –