Explanation Of Symbols - Husqvarna Rider 15V2 AWD Operator's Manual

These symbols are on the machine and in the operator's manual.
N
Neutral
Oil level Cutting height
Hydrostatic free wheel
Noise emission to surroundings in accordance
with the directive of the European Community. The
machine's emission is indicated in the chapter
TECHNICAL DATA and on the decal.
Never use the machine if persons, especially
children, or animals, are in the vicinity.
6
– English

EXPLANATION OF SYMBOLS

Study them carefully so that you know what they mean.
Read the operator's manual
Fast Slow
Backwards
Use hearing protection
Warning!
Rotating blades.
Never carry passengers on the
machine or equipment.
Starting instructions
Read the instructions
Check the engine's oil level
Check the hydrostat's oil level
Lift up the cutting unit
Put the hydrostat pedals in the
neutral position
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
Engine off Choke
Forwards
Parking brake
Warning! Never drive across a
Risk that the machine
can tip over
Keep hands and feet away
from under the hood when
the engine is running.
Fuel
Ignition
Warning
CE conformity
slope marking
Drive very slowly without
the cutting unit.
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off
the ignition cable before repairs
or maintenance