Driving; Before Starting; Starting The Engine - Husqvarna Rider 15V2 AWD Operator's Manual

Before starting

• Read the safety instructions and information on
the location and function of the controls before
starting, see page 5-14.
• Conduct daily maintenance before starting (see
"Maintenance schedule" on page 20.

Starting the engine

1. Lift up the cutting unit by pulling the lever
backwards to locked position (transport posi-
tion) and apply the parking brake.
Rider 15V2 AWD
The engine can not be started if the parking
brake is not pressed down.
2. Move the throttle control to the middle position.
3. If the engine is cold move the choke lever
backwards to its end position.
4. Turn the ignition key to the start position.

DRIVING

17
English –