Cutting Unit; Lift Lever For Cutting Unit - Husqvarna Rider 15V2 AWD Operator's Manual

Cutting unit

Rider 15V2 and Rider 15V2 AWD can be equipped
with two different cutting units.
Combi -
Combi -
See "Maintenance \ Checking the Blades" for
identification of the cutting unit.
The combi deck functions as a mulching deck when
a bio-clip plug is mounted. Without the plug, the
deck will function as a rear ejection deck.

Lift lever for cutting unit

The lift lever is used to set the cutting unit in trans-
port or cutting position.
If the lever is pulled back the unit will lift up and the
blades will automatically stop rotating (transport
position).
If the lock button is pressed and the lever is moved
forward the unit will be lowered and the blades will
automatically start rotating (cutting position).
The lever can also be used to temporarily regulate
the cutting height, e.g. for a small mound in the
lawn.
PRESENTATION
1030 mm/41"
1120 mm/44"
Lifting of the cutting unit (transport position)
Lowering of the cutting unit (cutting position)
15
English –