Release Lever - Husqvarna Rider 15V2 AWD Operator's Manual

Release lever Rider 15V2
The release control must be pulled out in order for
the Rider to be moved when the engine is shutoff.
Release lever Rider 15V2 AWD
Rider 15V2 AWD has one control for the front axle
and one control for the rear axle.
Pull the controls to their end positions. Do not use
an intermediate position.
Rear Axle
• Control pulled out, drive system disengaged.
• Control pushed in, drive system engaged.
Front Axle
The control is positioned on the inside of the left
front wheel.
• Rear control (pulled out), drive system disengaged.
• Front control (pushed in), drive system engaged.
DRIVING
Rider 15V2
Rider 15V2 AWD rear
Rider 15V2 AWD front
23
English –