Upgrading System Firmware - GeoVision GV-LX4C3D1 Quick Start Manual

7
Basic Operations

Upgrading System Firmware

You can perform the following basic operations using the remote control.
Operations Steps
Date/Time Adjustment Press the Menu button, select ADVANCED and then
select DATE AND TIME.
Recording Operation Press the Rec button to start recording and press the
Stop button to stop recording.
Search and Playback Press the Search button to see the search and
playback options.
PTZ Control Press the Channel button to display the PTZ channel
and use the directional buttons to control the PTZ
movement.
Channel Number and Press the Menu button, select Channel Settings and
Camera Name then Channel Name to change the camera name.
Press the Menu button, select Advanced and then
Display Settings to display the channel number or
camera title.
Video Backup Press the Menu button, select Advanced and then
Backup to specify the time and channel for backing
up video files.
8
Upgrading System Firmware
GeoVision will periodically release the updated firmware on the website. To load the
new firmware into the GV-Compact DVR V3, read the important notes below and then
follow the instructions.
Important:
1. While the firmware is being updated, the power supply must not be
interrupted.
2. Do not turn the power off for 10 minutes after the firmware is updated.
3. If you use the IP Device Utility for firmware upgrade, the computer used to
upgrade firmware must be under the same network of the GV-Compact DVR
V3.
1. In the Live View window, click the Show System Menu button and select Remote
Config. This dialog box appears.
2. Click the Browse button to locate the firmware file (.img) saved at your local
computer.
3. Click the Upgrade button to start the upgrade.
WARNING: The interruption of power supply during updating causes not only
update failures but also damages to the GV-Compact DVR V3. In this case,
please contact your sales representative and send your device back to
GeoVision for repair.
9F, No. 246, Sec. 1, Neihu Rd., Neihu District, Taipei, Taiwan
Tel: +886-2-8797-8376
support@geovision.com.tw
Fax: +886-2-8797-8335
http://www.geovision.com.tw