Changing The Camera Feed; Displaying Multiple Camera Feeds Using Quad View - Raymarine A Series Installation And Operation Instructions Manual

22.2 Changing the camera feed

Changing the camera / video feed
On a New a Series or New e Series display, if more
than 1 feed is available you can change which feed
is displayed on the screen using touch.
From the Camera application.
1. Touch and swipe your finger up to move to the
next video feed.
2. Touch and swipe your finger down to display the
previous video feed.
Changing the camera / video feed
On a New c Series or New e Series display, if more
than 1 feed is available you can change which feed
is displayed on the screen using the Joystick.
From the Camera application
1. Move the Joystick Down to display the next
video feed.
2. Move the Joystick Up to display the previous
video feed.
Changing the camera / video feed using the
menu
When more than 1 feed is available, you can change
which feed is displayed onscreen using the menu.
From the Camera application:
1. Select Menu.
2. Select Camera View.
3. Select Camera:.
4. Select the feed you want to display.
Camera application
22.3 Displaying multiple camera feeds
using Quad View
When an IP camera is available on the network, the
Camera application can be set to Quad View. In
Quad View up to 4 camera feeds can be viewed
simultaneously.
Quad View can consist of up to 4 x IP feeds or 1 x
analog feed and up to 3 x IP feeds.
D12598-1
To enable Quad View, from the Camera application:
1. Select Menu.
2. Select Camera View.
3. Select Layout: so that Quad View is displayed.
4. Arrange the feeds by selecting a feed in each
of the Top-Left, Top-Right, Bottom-L and
Bottom-R menu options as required.
Analog feeds can only be displayed in the top
left corner.
5. The top left corner can also be set to cycle
through all available analog and IP feeds using
the cycling options available in the Top-Left
menu.
See 22.4 Camera cycling
feeds.
Recording, taking photos, naming feeds and
adjusting the video image are not supported in Quad
View; however it is possible to switch to Quad View
whilst recording in Single View.
Note: Except for gS Series displays, Quad View
is not available on MFDs with a 9 inch or below
screen size when the Camera application is being
viewed as part of a splitscreen page.
Note: Displaying multiple IP feeds on multiple
MFDs simultaneously may cause some feeds to
not be displayed.
Using onscreen controls
On touchscreen displays, onscreen controls are
available to quickly switch between Quad View and
Single View.
In Quad View:
1. Select the feed.
The Expand icon
2. Select the Expand icon to view the feed in
fullscreen.
for details of cycling
is displayed.
343