Raymarine A Series Installation And Operation Instructions Manual page 125

5. Browse to and select the file you want to import.
A confirmation dialog is displayed.
6. Select OK.
Note: When Routes and Tracks are imported they
will be hidden by default, to display the imported
routes and tracks please refer to the
hiding routes and tracks
Erasing user data files from a memory card
With the Homescreen displayed:
1. Ensure you have the memory card containing the
data in one of the card slots.
2. Select My Data.
3. Select Import/Export.
4. Select Erase from Card.
The file browser is opened.
5. Browse to and select the file you want to erase.
A confirmation dialog is displayed.
6. Select Yes.
Erasing waypoints, routes, and tracks from
the system
Note: The following procedure permanently
erases selected or ALL waypoints, routes, or
tracks stored on the display. BEFORE proceeding,
ensure that you backup any data that you want to
keep on to a memory card.
With the Homescreen displayed:
1. Select My Data.
2. Select Import/Export.
3. Select Erase from System.
4. Select Erase Waypoints from System, Erase
Routes from System, or Erase Tracks from
System, as appropriate.
Managing display data
Showing or
section.
5. Select the specific data items you want to erase,
or select Erase All.
A message is displayed prompting you for
confirmation.
6. Select Yes to proceed with the deletion, or No
to cancel the operation.
Backing up user settings to a memory card
With the Homescreen displayed:
1. Ensure you have a memory card (NOT a chart
card) in one of the card slots.
2. Select My Data.
3. Select Import/Export.
4. Select Backup Settings.
If your display has more than 1 card slot then a
message is displayed prompting you to select the
memory device you want to save the settings to,
if your display only has 1 card slot then you will
not be prompted.
5. Select SD1 for a memory card in the top card slot,
or SD2 for a memory card in the bottom card slot.
A confirmation dialog is displayed.
6. Select OK.
Restoring user settings from a memory card
With the Homescreen displayed:
1. Ensure you have the memory card containing the
user data in one of the card slots.
2. Select My Data.
3. Select Import/Export.
4. Select Restore Settings.
If your display has more than 1 card slot then a
message is displayed prompting you to select
the memory device you want to retrieve settings
from, if your display only has 1 card slot then you
will not be prompted.
5. Select SD1 for a memory card in the top card slot,
or SD2 for a memory card in the bottom card slot.
A confirmation dialog is displayed.
6. Select OK.
125