Interleaved 2 Of 5 - Microscan Quadrus MINI Imager User Manual

Interleaved 2 of 5

Interleaved 2 of 5

Usage:
I-2/5 has been popular because it is the most dense symbology for printing
numeric characters less than 10 characters in length; however, Microscan
does not recommend this symbology for any new applications because of
inherent problems such as truncation.
Definition:
A dense, contimuous, self-checking, numeric symbology. Characters are
paired together so that each character has five elements, two wide and
three narrow, representing numbers 0 through 9, with the bars representing
the first character and the interleaved spaces representing the second
character. (A check character is highly recommended).
Important: You must set Symbol Length in order to decode I-2/5 symbols,
unless Range Mode is enabled.
Serial Cmd: <K472,status,check character status,check character output status,symbol
length #1,symbol length #2,guard bar status,range mode status>
Default:
Disabled
Options:
0 = Disabled
Check Character Status (Interleaved 2 of 5)
Usage:
This option is not typically used, but it can be enabled for additional security
in applications where the host requires redundant check character verifica-
tion.
Definition:
An error correcting routine in which the check character character is added.
Serial Cmd:
<K472,status,check character
length #1,symbol length #2,guard bar status,range mode status>
Default:
Disabled
Options:
0 = Disabled
Check Character Output Status (Interleaved 2 of 5)
Definition:
When enabled, a check character character is sent along with the symbol
data for added data security.
Serial Cmd: <K472,status,check character
bol length #1,symbol length #2,guard bar status,range mode status>
Default:
Disabled
Options:
0 = Disabled
6-16
1 = Enabled
status,check character output status,symbol
1 = Enabled
status,check character output
1 = Enabled
Quadrus MINI Imager User's Manual
status,sym-