Step 4 Install Esp - Microscan Quadrus MINI Imager User Manual

Step 4 — Install ESP
Easy Setup Program (ESP) is Microscan's proprietary setup and testing application. The
purpose of ESP is to provide a quick and easy way to set up and configure Microscan readers.
When the Quadrus MINI is connected to a host computer (Windows Vista, XP, or 2000),
ESP can be used to configure reader settings and to set up communications between the
reader and host.
If installing from the Microscan Tools CD:
1. Insert the Microscan Tools CD in your computer's CD drive.
2. Select ESP Software from the navigation bar at the left of the screen.
3. Click on ESP Software under the Current Version heading.
4. Click the Run button and follow the prompts in the ESP Setup Wizard.
Note: During installation, you may see an Internet Explorer Security Warning that
states: "The publisher could not be verified." If you see this warning, click Run to
continue installation.
If downloading from the web:
1. Go to the Download Center at www.microscan.com.
2. Create a new member account or, if you are already a member, enter your user name
and password.
3. Navigate to the "Microscan Software" section of the Download Center (near the top of
the page).
4. Click on the link showing the latest version of ESP. Extract the ESP installation files to
a location of your choice on the host computer. Note where your ESP.exe file is stored
on your hard drive.
5. At the end of the installation process, the following icon will appear on your desktop:
6. Click the ESP icon to start the program.
System Requirements for ESP
• 166 MHz Pentium processor (recommended)
• Windows Vista, XP, or 2000 operating system
• Internet Explorer 5.0 or higher
• 64 MB minimum RAM
• 40 MB minimum disk space
• 800 x 600 pixel minimum 256 color display
Quadrus MINI Imager User's Manual
Quick Start
1-5