Using Job Accounting; Login/Logout; Password Protect Administrator Settings - Kyocera TASKalfa 1801 Operation Manual

Job Accounting > Using Job Accounting

Using Job Accounting

This section explains procedures while setting job accounting.

Login/Logout

If job accounting is enabled, an account ID entry screen appears each time you use this machine.
Use the procedure below to login and logout.
Login
Logout
When the operations are complete, press the [Logout] key to return to the account ID entry screen.

Password Protect Administrator Settings

If the following account ID entry screen appears on your PC, enter the assigned Account ID and then click [OK].
1
In the screen below, enter the account ID using the numeric keys and press the [OK] key.
Account ID:
Counter
NOTE
• If you entered a wrong character, press the [Clear] key and enter the account ID again.
• If the entered account ID does not match the registered ID, a warning beep will sound
and login will fail. Enter the correct account ID.
2
Proceed to complete the rest of the steps.
8-22