Table of Contents
Advertisement
Power On the Computer
After you have fully charged and installed a battery, power on the computer for the
first time:
•
Welcome Screen
The first time you power on the computer, a Welcome screen appears. You can
either scan a configuration bar code or use the Wizard to manually set up the
computer. To learn more about how to
During the manual setup process, follow the prompts on the screen as the wizard
has you:
•
•
•
•
•
Once you complete the initial setup, the Welcome screen no longer appears when
you power on the computer and Provisioning mode is automatically turned Off
(disabled). Scanning a bar code to install applications, certificates, configuration
files, and licenses on the computer is restricted when Provisioning mode is turned
Off. To learn more
Unlock the Screen
The screen lock automatically activates every time the computer is turned On or
when the computer wakes from sleep mode.
•
The level of security provided depends on the type of lock set (e.g., Swipe, Pattern,
PIN, or Password). The default setting, Swipe, provides no protection against
unauthorized access to your computer.
Change the Screen Lock to Protect the Computer
After you start using the computer, you should change the screen lock to prevent
unauthorized persons from accessing the computer after the screen lock activates
unless they input the correct password, pin, or pattern.
14
Press and hold the Power button for approximately 3 seconds, and then release
the button.
Set the default language.
Set up the Wi-Fi network connections.
Set the time, date, and time zone.
Personalize (name) the computer.
Set up security and privacy options.
About Provisioning Mode
Swipe up from the lock icon at the bottom of the screen.
Scan Bar
Codes, see
see
page
78.
Dolphin CN80 Mobile Computer
page
48.
Advertisement
Table of Contents
