D Direct Code Entry - Icom IC-F51 Instruction Manual

4
BIIS OPERATION

D Direct code entry

q Whle n the standby condton, push [TX Code Enter] to enter
the TX code edt mode.
• Edtable code dgt blnks.
w Push [TX Code Enter] to select the desred dgt to be edted.
• Edtable dgt dffers accordng to the settng.
e Set the desred dgt usng [
Code CH Down].
r Push [TX Code Enter] to set the dgt. The edtable dgt wll
move to the rght automatcally.
t Repeat e and r to nput all allowable dgts.
y Push [P0] (Call) or [PTT]* to call.
* PTT call can be made only when PTT call capablty s permtted.
NOTE: When no answer back s receved, the transcever re-
peats the call 3 tmes (default) automatcally, and
dsplayed durng each call. However, an error beep sounds
and
after the calls.
u Push [PTT] to transmt; release to receve.
i Push [P3] (Mon(Aud)) to send the "Clear down" sgnal.
For your information
When the "UpDate" settng for the call code s enabled, the set
code s overwrtten nto the call code memory.
26
s dsplayed when no answer back s receved
" "
]/[ ]/[TX Code CH Up]/[TX
s
" "