Atex Cautions - Icom IC-F51 Instruction Manual

8
D Special conditions for safe use
The equpment s an ntrnscally safe equpment. It can be used n
a potentally explosve atmosphere.
The equpment must be powered only by the battery Icom type
BP-227AX.
When the transcever s used n a hazardous areas, ether the jack
cover or HM-138 must be attached to the connector. Falure to do
ths wll make the rado ATEX non-complant and may result n an
accdent durng use n hazardous areas.
The battery shall be charged only n non hazardous areas.
The battery shall be changed only n non hazardous areas.
Ambent operatng temperature: –20°C to +55°C
D Meaning of ATEX marking codes
CE conformity
marking
Identification number of
notified body (where ap-
propriate) (LCIE: 0081)
Equipment conforms to types of
protection standardized by CEN-
ELEC (European standards)
Intrinsic safety
according EN60079-0
46

ATEX CAUTIONS

Explosion pro-
tection marking
Equipment group:
(for mines)
Equipment category:
1 (for Zone 0 or 20)
2 (for Zone 1 or 21)
3 (for Zone 2 or 22)
(for other than mines)
Gas Group
(see Fig. 1)
Type of Explosive
atmosphere:
G (for gas, vapors
and mist)
D (for dusts)
Marking temperatures
(see Fig. 1)