TransmTtNg A Status; FunctOn DSplay - Icom IC-F51 Instruction Manual

4
BIIS OPERATION
■ Transmitting a status
D General
The status message can be selected wth the programmed text,
and the message text s also dsplayed on the functon dsplay of
the called staton.
Up to 24 status types (1 to 24) are avalable, and the status mes-
sages 22 and 24 have desgnated meanngs.
Status 22: Emergency*
Status 24: GPS request
* The status 22 can also be used as a normal status message by ds-
ablng the desgnated meanng. However, the status 24 s fixed.
The status call can be sent wth both ndvdual and group calls.
D Transmitting a status
q Whle n the standby condton, push [P1] (Dgtal), then push
[ ]/[
w Push [P1] (Dgtal) agan, then push [
sred status message.
Or, you can select the desred status message usng [Status
Up]/[Status Down] key drectly.
e Push [P0] (Call) or [PTT]* to transmt the status message to the
selected staton/group.
*PTT call can be made only when PTT call capablty s permtted.
• 2 beeps wll sound and the transcever returns to the standby con-
dton automatcally when the transmsson s successful.
30
] to select the desred staton/group code.
Status message s dsplayed.
]/[ ] to select the de-