Error: #S2-3310 Turn Off Then; Error: #S2-3311 Turn Off Then; Error Code S1-2411; Error Code S1-4210 - Samsung ProXpress M337x Service Manual

Proxpress m337x/m387x/m407x series mono laser mfp
Hide thumbs Also See for ProXpress M337x:
Table of Contents

Advertisement

4. Alignment and Troubleshooting
► Error Code
S1-2411
► Error message
Error: #S1-2411 Turn off then on
► Symptom
SD card has some problem.
► Troubleshooting method
1) Check if the SD card is installed properly. Remove and reinstall it.
2) If the problem persists, replace the SD card with new one.
► Error Code
S1-4210
► Error message
Error: #S1-4210 Turn off then on
► Symptom
Communication error between the main board and fax board has occurred.
► Troubleshooting method
1) Check if the connection between the main board and fax board.
2) If the problem persists, replace the fax board.
3) If the problem persists, replace the main board.
► Error Code
S2–331x
► Error message
Error: #S2-331x Turn off then on
► Symptom
This error shows the engine status.
► Troubleshooting method
1) S2–3310 : Warm-up status
2) S2–3311 : Ready status
3) S2–3312 : Printing status
4) S2–3313 : Power Save status
5) S2–3314 : Error status
6) S2–3315 : Recovery status
7) S2–3316 : Wait status
8) S2–3317 : EDC mode status
9) S2–3318 : Low power status
When these errors display, wait until the message will be disappeared or turn the machine off then on.
4-63
Copyright© 1995-2013 SAMSUNG. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents